|
MGL-135S type
Hits:1441
Time:2018-03-24 19:23:17
|
Description
nine hundred
Product Description
The MGL-135S tracked high lift anchor drilling rig is an efficient drilling rig developed by Wuxi Banshan Engineering Machinery Manufacturing Co., Ltd. based on domestic subways, high-rise buildings, airports, ground source heat pumps, and other deep foundation pits for anchoring, rotary spraying, and dewatering< Br/>
Main purpose:
1. Anchorage can be suitable for drilling with drill pipes, casing drilling, and composite drilling with drill pipes and casing< Br/>
2. Rotary spraying can be suitable for single, double, triple rotary spraying and other construction methods< Br/>
3. Foundation pit dewatering< Br/>
4. Construction of pipe shed support< Br/>
5. Micro cast-in-place piles< Br/>
6. Construction and survey of geothermal holes (wells)< Br/>
7. The maximum lifting height is 3.3 meters, and the double oil cylinder excavator type boom has excellent stability in any lifting state. It can simultaneously construct two to three rows of holes, saving labor and improving efficiency. It can be constructed in horizontal, vertical, elevation, and negative angles, meeting various construction process requirements. The torque and speed can be reasonably distributed according to actual needs, with a propulsion frame stroke of 3.4 meters, which can be used for composite drilling of 3 meters of drill pipe and casing. Equipped with a tracked chassis, a high-level rotating platform, a large diameter support leg oil cylinder, a 0.9 meter sliding frame, and an orifice support device, the cobalt machine is extremely convenient for displacement and positioning, and stable and reliable during drilling. Equipped with a clamping shackle, it reduces labor intensity and improves efficiency in loading and unloading drill pipes and casings< Br/>
Common construction techniques:
1. Three wing drill bit drilling, mud discharge. Suitable for high-speed drilling in soil layers and other formations< Br/>
2. Air down-hole hammer drilling, air slag removal. Suitable for construction of rock layers and fractured layers< Br/>
3. Hydraulic hammer drilling at the bottom of the hole, mud discharge. Suitable for construction in formations with high water content such as fractured layers and sand and egg layers< Br/>
4. Casing drilling< Br/>
5. Composite drilling with drill pipe and casing< Br/>
6. Single, double, triple rotary spraying, fixed spraying, swing spraying, and other rotary spraying and expanding head tracing processes.
Usage performance
Specification
MGL-135S
Drilling diameter (mm)
Drilling diameter (mm)
Φ 150-φ two hundred and fifty
Drilling depth (m)
Drilling depth (m)
10.0-140
Drill pipe diameter (°)
Drill pipe diameter (mm)
Φ 89,φ 102,φ one hundred and fourteen
Drill pipe inclination angle (mm)
Drill pipe dip (°)