Construction project wheel washer, site wheel washer flushing water is equipped with a special pool, designed as a clear water pool and sedimentation tank to ensure the recycling of water. The construction site wheel washer adopts the method of sludge removal pump to remove the sludge: usually the method of removing the silt of the car wash by the construction site wheel washer equipment is to use the scraper to scrape out the sludge, and this method cannot scrape the sludge at all in actual use
Construction works> wheel washer
The washing water of the construction site wheel washer is equipped with a special pool, which is designed as a clean water pool and a sedimentation tank to ensure the recycling of water. The construction site wheel washer adopts the method of sludge pump sludge removal: usually the construction site wheel washer equipment removes the silt of the car wash by using the scraper to scrape the sludge out, this method can not scrape the silt at all in actual use, on the contrary, the scraper plays the role of a mixer in the pool, stirring up the precipitated sludge, so that the originally turbid water of the pool becomes mud water, which greatly reduces the effect of car washing. Through research, we changed the original sludge removal method and now use a slurry pump to remove sludge. The original situation has been changed and the recycling rate of water has been greatly improved. Wheel washer to find us Hunan Ruisheng mechanical and electrical equipment.
The construction site wheel washer equipment can carry out all-round washing of the construction vehicle, and the side of the chassis tire is completely washed. It can not only control the dust brought by construction vehicles, but also prohibit vehicles from bringing mud on the road. A standard version of the car wash machine is about two and a half meters long, the height is about 1.2 meters (can be processed and customized), the high-pressure stainless steel nozzle can reach more than 160, the dirty water after flushing through the drainage ditch below into the sedimentation tank, through the three-stage sedimentation cycle is reused.
The main features of the construction project wheel washer: fully automatic cleaning, no manual operation. Short cleaning time, 0-60 seconds can be adjusted arbitrarily.
Energy saving, environmental protection clean water recycling, water saving. The equipment is robust and durable, has a long service life and can be transferred at any time. Easy to transport and install, it can be put into use in 2 hours.
Compared with other vehicle washing machines, the construction site wheel washer has its advantages: water recycling, washing machine flushing water has a special pool, designed as a clean water pool and sedimentation tank to ensure the recycling of water. Low cost, convenient transfer transportation and installation. Most of the existing vehicle washing machines in the market use the form of steel structure, that is: the washing machine and the foundation are integrated with steel structure. There are great problems after long-term use of such a washing machine, one of which is that because the foundation is soaked in water all day and rust is serious, it is difficult to ensure safety for long-term use. Second, it is extremely inconvenient to transfer the site in the future. The washing machine produced by our company adopts concrete foundation, which reduces the cost of shopping and greatly increases the safety and reliability of the car washing machine. The washing machine is split type, which can be disassembled and installed in blocks, which provides convenience for future transfers. The electrical operating system is reliable and convenient. Wheel washer to find us Hunan Ruisheng mechanical and electrical equipment.