We all know that the machine, open the machine to do our work, in order to profit on the need for efficient and continuous downtime. Equipment maintenance, delay the construction period will increase the cost of construction. In many cases, the need to replace the wear parts, and we share the following four aspects need to pay attention to help you reduce the wear parts.
Keep working at rated load
The nature and size of the working load of construction machinery have an important influence on the loss of mechanical parts. Generally speaking, the wear of parts will increase with the increase of load. When the load is higher than the design load, the wear will be increased. Under the same conditions, the stable load is higher than the frequency of the dynamic load on the part of the wear less, fewer faults, longer life.
Corrosion of parts
Corrosion on the part, sometimes not easy to find, easy to be ignored, greater harm.
Rainwater, chemical substances in the air through the mechanical parts of the pipeline, such as the gap into the machinery, corrosion parts. The corrosion of the parts continue to work will also accelerate the mechanical wear, increase mechanical failure. This requires managers and operators should be based on the local weather conditions, site conditions, to take reasonable arrangements for the construction, as far as possible to reduce the risk of chemical corrosion of mechanical parts.
Clean in time to reduce the impact of mechanical impurities
Mechanical impurities generally refers to dust, dirt and other material and engineering machinery in the process of using self generated some metal shavings, grease etc.. Once the impurities arrive at the working surface of the machine, the harm is great: not only increase the friction force, fuel consumption increased; and will destroy the lubricating oil film.
Keep parts reasonable temperature
In the work, the temperature of each component has its own normal range. Temperature is too low will affect the strength of the parts, so need to cooperate with the coolant and oil control part of the temperature, so that they work in a reasonable temperature range.
Less wear parts, you can replace less or even no replacement. To save money is to earn!